One of the most used method for remote access today is SSH protocol. Even most on the network engineer say what is so complicated in the process of the enable , disable , reconfigure of the SSH process, my experience proved me that it can be really complicated, if you mess up stuff there.
One of the situation that I see very often, is that after a network engineer (administrator, beginner…) reconfigure SSH or hostname / domain-name on the Cisco routers is that they tell that is not working anymore with some errors like “key missing” or “key not matching” or more errors relating to the RSA keys. And in almost 90% from the cases was due to wrong order of operation during the SSH reconfigure.
Let’s say that we have a functional SSH access, and then we have to change the hostname and domain-name of the Cisco machine. As you know, SSH relay on RSA keys for connectivity, which relay on hostname and domain-name of the machine when the keys are creating. Most common error is that the network person change the hostname, domain-name, then delete the keys and reconfigure a new one…this is the happy case and for some routers and IOS platform is working. But, there is the worst one, when the person in charge change the domain-name and the hostname and then, he/she expect ssh to work like before. But it does not!
Please check the tutorial below for the correct order of operation in enabling, disabling or reconfiguring the SSH protocol on a Cisco device. For this tutorial I will use 2 point-to-point connected routers R0 and R1. I will enable SSH on R1 and then connect to it from R0.
4 thoughts on “Cisco: SSH enable | disable | reconfigure tutorial”
Thanks!!! God bless you :)