How to create your own Docker image

I mentioned in my previous post that I’ll explain how to create your own Docker image and customize it however you’d like. While is great to just use an image from Docker Hub, it can be that you need some customized image to fit your needs. As said before, is not hard at all to create the image and worth knowing how to do it.

I’ll use for this tutorial a fresh Ubuntu 18.04 minimal installation. You can follow the same steps (or almost) using different Linux distro, Microsoft Windows or MacOS. The reason why I chose Ubuntu is simply because is the distro that I’m most familiar and enjoy working with.

For all steps below you need to be root or run the commands via sudo. So you’ll see either # at the begining of the command if you’re root or $ sudo if you pick to run it with elevated rights.

Install Docker

# apt install -y docker.io

A word of advice here. Be sure to have docker.io typed. If you miss the .io, the system will install a docker, but that’s a different package:

docker/bionic 1.5-1build1 amd64
  System tray for KDE3/GNOME2 docklet applications

You’ll end up with something that cannot be used for what we want to achieve, since the docker command isn’t even there.

You can test if the installation completed successfully by using the following command:

# service docker status

You should see something like this in the output:

Docker service successful status

Since this is a new installation, you’ll have no images, no containers, nothing.
You can check, just to be sure.

# docker image ls

The result should be:

Docker image ls return nothing

I’ll add at the end of the post some basic (and most important) Docker commands to get you started.

Pull Ubuntu 18.04 image – Optional step

This step is optional, but I’d advise to do it, just to test that everything is fine with your Docker installation In this case we’re going to use the official Ubuntu 18.04 minimal Docker image. If you want to read more about this image you can check the explanation on Ubuntu 18.04 minimal Docker image and check their repository on Docker Hub – Ubuntu.

# docker pull ubuntu:18.04

If everything goes well you should see a message ending with “Status: Downloaded newer image for ubuntu:18.04” :

Docker successful download of Ubuntu image

Time to run our first container:

# docker run -i -t ubuntu:18.04 /bin/bash

You should be now in container shell:

Docker container

Now that we tested you can type exit to leave the container.

Create Dockerfile

The Dockerfile is nothing more than a text document which contains all the commands a user could call on the command line to create an image.
A detailed explanation is beyond the scope of this post, but if you’d like to learn more, you can check the Docker Documentation – Dockerfile

Here is a sample that’s good to start with:

# My custom Ubuntu 18.04 with 
# various network tools installed
# Build image with:  docker build mycustomlinux01 .


FROM ubuntu:18.04
MAINTAINER Calin C., https://github.com/yotis1982
RUN apt-get update --fix-missing
RUN apt-get upgrade -y
RUN apt-get install -y software-properties-common
RUN apt-get install -y build-essential
RUN apt-get install -y net-tools mtr curl host
RUN apt-get install -y iputils-arping iputils-ping iputils-tracepath
RUN apt-get install -y iproute2
RUN apt-get install -y traceroute
RUN apt-get install -y tcpdump

A short explanation:

# – This is a comment, add here whatever you think is useful. I’ve picked the name “mycustomlinux01”, but you can add whatever you like.
FROM – is always your first instruction, because it names the base image you’re building your new image from.
MAINTAINER – is the creator of the Dockerfile.
RUN – instruction to run the specified command, in this case apt-get to install various packages

There are multiple instructions for setting environment variables like ADD, COPY, ENV, EXPOSE, LABEL, USER, WORKDIR, VOLUME, STOPSIGNAL, and ONBUILD. You can read all about them in the Docker Documentation – Dockerfile

Using RUN you can add whatever package you need in your custom image. The same like you would do on a regular Ubuntu installation.
Yes, all the packages above could have been added in one RUN line, but for the sake of better visibility I would suggest to have separate lines.

Create your custom Docker image

After you save the Dockerfile is time to create your image

# docker build -t mycustomlinux01 .

You’ll see a lot of output, the same like when you’re installing new packages in any Linux distro. When you see the following lines, you’ll know that the image was successful created:

Docker successful image creation

Let’s check if the image is listed using:

# docker image ls

You should see the mycustomlinux01 image listed:

List my Docker image

Since the image is created successful I’d suggest that you run a container using this image following the same steps like in the “Pull Ubuntu 18.04 image”

Basically that’s it, you just created your custom image.

As mentioned above, here is a list of commands that I find useful to have at hand when working with Docker containers.

List images:

# docker image ls

Start a container from an image:

# docker run -i -t ubuntu:12.04 /bin/bash

Using an ID (you get the ID from List image command):

# docker run -i -t 8dbd9e392a96 /bin/bash

List all containers:

# docker ps -a

List running containers:

# docker ps -l

Attach running container:

# docker attach “container ID”

Remove a container:

# docker rm “container ID”

Last but not least. If you liked my Ubuntu 18.04 Docker image customized for network engineers who wants to learn Python and you would like to install additional packages, here is the Dockerfile:

# Ubuntu 18.04 with Python, Paramiko, Netmiko, Ansible
# various other network tools installed and SSH activated
# Build image with:  docker build -t yotis/ubuntu1804-pfne .

FROM ubuntu:18.04
MAINTAINER Calin C., https://github.com/yotis1982
RUN apt-get update --fix-missing
RUN apt-get upgrade -y
RUN apt-get install -y software-properties-common
RUN apt-get install -y build-essential
RUN apt-get install -y openssl libssl-dev libffi-dev
RUN apt-get install -y net-tools mtr curl host socat
RUN apt-get install -y iputils-arping iputils-ping iputils-tracepath
RUN apt-get install -y iproute2
RUN apt-get install -y iptraf-ng traceroute
RUN apt-get install -y tcpdump nmap
RUN apt-get install -y iperf iperf3
RUN apt-get install -y python python-pip python-dev
RUN apt-get install -y python3 python3-pip python3-dev
RUN apt-get install -y openssh-client telnet
RUN apt-get install -y nano
RUN apt-get install -y netcat
RUN apt-get install -y socat
RUN pip install --upgrade pip
RUN pip install cryptography
RUN pip install paramiko
RUN pip install netmiko
RUN pip install pyntc
RUN pip install napalm
RUN apt-add-repository ppa:ansible/ansible
RUN apt-get update
RUN apt-get install -y ansible
RUN apt-get clean
VOLUME [ "/root" ]
WORKDIR [ "/root" ]
CMD [ "sh", "-c", "cd; exec bash -i" ]

Obviously there is more about Docker than is covered on this post. It wasn’t in my scope to make a detailed analyze of Docker, rather a cheatsheet on how to create your custom image. If you want to learn more there are plenty resources out there and a good starting point is the Docker website.

I hope you find this how-to useful. As always, if you need to add something or you have questions about, please use the Comments form to get in contact with me.