Cisco: BGP path selection for outgoing traffic

Before going further on, please download the topology and the initial configuration files and have a close look into them (mostly into topology drawing). Also, this tutorial is addressed to people that know what is BGP and how to do a basic configuration for peering establishing.

For modifying the BGP automate selection of the best path, we have to modify some of BGP attributes from the table below:
Since today we will deal with outgoing traffic, we are interested in Weight and Local preference attributes, which we have to modify to reach our desired result. For the incoming traffic I will make another tutorial in some days.

So, let assume that we have some networks in the LAN after R1 in the topology and we advertise this into the BGP network. On R3, we will learn this prefixes by the way of R1 as it is the shortest path. But in our case the shortest path does not mean the fastest one. As you can see the connection between R1 and R3 is a Serial connection (let’s assume E1). The connections between R1 – R2 and R2 – R3 are FastEthernet connections. Even if this a longer path, for us would be better to reach the LAN subnets in behind R1 through R2, as this is more faster (bigger bandwidth and lower latency). We will force the outgoing traffic through R2 by modifying the Weight and Local preference attribute.

Please see the tutorial below:

Published by

Calin

Calin is a network engineer, with more than 20 years of experience in designing, installing, troubleshooting, and maintaining large enterprise WAN and LAN networks.

4 thoughts on “Cisco: BGP path selection for outgoing traffic”

  1. Hi, I saw a 3 of your interesting posted posts and wanted to ask in the event you can be thinking about reciprocal pages? Staff have blog about alexis texas ass! Anyway, in my language, there are not much good supply like this.

Any opinion on this post? Please let me know:

This site uses Akismet to reduce spam. Learn how your comment data is processed.